Support for your
Washer Dryer

Filter categories
- 125 articles for All support
 - 74 articles for Display messages & Indicator lights support
 - 3 articles for FAQ support
 - 7 articles for Leaks support
 - 1 articles for Network support
 - 4 articles for Noises support
 - 2 articles for Odours support
 - 30 articles for Unexpected behaviour support
 - 11 articles for Unsatisfactory result support
 - 2 articles for Visible damage support
 
All articles for Washer Dryer support
- < 25 % when drum empty
 - < 25 % when drum full
 - -0- on the display
 - 888 on the display
 - ADD on the display
 - Anti-crease/Check detergent
 - Anti-crease/Finish indicator light flashes and Locked comes on
 - Call Service
 - CapDosing
 - Check detergent
 - Check inlet indicator light flashes
 - Check load after end of programme
 - Check load and laundry is too damp
 - Check load programme cancelled
 - Ctr on the display
 - Dashes - - - on display and indicator lights flash
 - Display dark/no display
 - Display has stripes/streaks
 - Display has white dots/streaks
 - Display texts in another language
 - Door locked
 - Drain indicator light flashes
 - Drain/spin does not start
 - Enter PIN code
 - Exclamation mark and Technical fault flashing
 - Extra dry missing after update
 - Fabric conditioner remains in fabric conditioner compartment
 - Fault F1
 - Fault F2
 - Fault F3
 - Fault F4
 - Fault F10
 - Fault F11
 - Fault F16
 - Fault F19
 - Fault F20 or Heating fault
 - Fault F29
 - Fault F37
 - Fault F39
 - Fault F41
 - Fault F43
 - Fault F44
 - Fault F45
 - Fault F47
 - Fault F49
 - Fault F50
 - Fault F51
 - Fault F53
 - Fault F55
 - Fault F56
 - Fault F62
 - Fault F63
 - Fault F64
 - Fault F65
 - Fault F92
 - Fault F93
 - Fault F103
 - Fault F104
 - Fault F130
 - Fault F138
 - Fault F210 or Check filter + nozzle
 - Fault F220
 - Fault F242
 - Fault F398
 - Foam during washing
 - Foam escaping from detergent drawer during Rinse out fluff
 - Foam in the drum after Rinse out fluff
 - Functional faults due to fluff deposits
 - Grey greasy particles left behind on laundry
 - Grinding noises when drum rotates
 - i Cannot be changed
 - Kettle noises during PowerWash 2.0
 - Laundry has brown stains
 - Laundry has grey stains
 - Laundry has white residues
 - Laundry is plastered against drum after spinning
 - Laundry stiff after washing
 - Laundry too damp after drying
 - Laundry too damp/too dry after drying
 - Laundry/washer-dryer smells unpleasant
 - Leaking access panel
 - Leaking detergent drawer
 - Leaking door
 - Leaking screwed connection at water inlet hose
 - Limescale deposits in drum
 - Liquid detergent not getting laundry clean
 - Liquid in capsule at the end of the programme
 - Locked
 - Locked indicator light comes on
 - Locked. Enter code
 - Maintenance wash does not remove odours
 - Overload indicator light flashes
 - Pillows spins before wash cycle
 - Powder detergent left behind in detergent drawer
 - Rinse out fluff time left display incorrect (WT1F Prestige)
 - Slurping noises during draining
 - Soak/Pre-wash, Wash, Rinse or Rinse Stop flashes
 - Spinning sounds during the drying process
 - Start does not light up
 - Still fluff in the drum after Rinse out fluff
 - Techn. fault, contact Service
 - Time left display changes/stops
 - Time left varies
 - TwinDos 1/2 is empty. Check the wash results.
 - TwinDos cartridge is leaking
 - TwinDos cartridges: changeover from film seal to caps
 - TwinDos maintenance for compartment 1/compartment 2 must be started
 - TwinDos not usable
 - Update does not start
 - Use “TwinDos” or carry out TwinDos maintenance in the “Maintenance” menu
 - Use TwinDos or start maintenance
 - Vibrations during spinning
 - Washer-dryer drains frequently with PowerWash 2.0
 - Washer-dryer inoperative
 - Washer-dryer not spinning correctly
 - Water drainage fault
 - Water in the drum
 - Water inlet fault
 - Water inlet fault during initial commissioning
 - Water next to the capsule
 - Water under washing machine/washer-dryer
 - Waterproof system activated
 - Why is it not possible to set a temperature in the Eco 40–60 programme?
 - WoollensDrying mode time left display incorrect (WT1F Prestige)
 - Zero setting not possible
 
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual