Support for your
Tumble Dryer
Filter categories
All articles for Tumble Dryer support
- 0 and Finish displayed or Anti-crease/Finish illuminated
- 0:00 on the display
- 3 LEDs light up/flash
- 888 on the display
- ADD on the display
- Adjust the load and
- Bars === ... -== ...== ... -= ... on the display
- Buzzing or humming noises
- CHE on the display
- Clean door filter keeps appearing
- Clean out airways indicator light comes on
- Clicking noises from tumble dryer
- Cold air or Finish flashes
- Cottons ECO/drum’s direction of rotation does not change
- Ctrl on the display
- Dashes --- on display
- Display dark and
Start/Add laundry is flashing - Display dark/no display
- Display has stripes/streaks
- Display texts in another language
- Drum inoperative after programme start
- Drum lighting does not come on
- Drum lighting on/dryer switched on
- Dryer is operating with door open
- Drying level cannot be changed in programme
- Drying process goes on too long or switches off
- Drying indicator light flashes
- Empty out container indicator light comes on
- Fault F1
- Fault F2
- Fault F3
- Fault F4
- Fault F30
- Fault F36
- Fault F38
- Fault F39
- Fault F40
- Fault F41
- Fault F43
- Fault F45
- Fault F46
- Fault F50
- Fault F53
- Fault F55
- Fault F66
- Fault F99
- Fault F104
- Fault F108
- Fault F156
- Fault F157
- Fault F158
- Fault F159
- Fault F206
- Fault F207
- Fault F242
- Fault F252
- Fluff during drying
- Grinding/squeaking noises from tumble dryer
- Information Clean out airways/end of programme
- Laundry or pillows smell unpleasant
- Laundry statically charged after drying
- Laundry still damp after DryCare 40
- Laundry/tumble dryer smells unpleasant
- Locked indicator light comes on
- Locked indicator light flashes
- noC on the display
- Noises during start-up
- Programme cancelled after brief period
- Red lamp indicator light lights up
- Rolling bars on the display
- Slits/slashes/holes in door seal
- Spray jet during Steam smoothing insufficient
- Start/Stop indicator light flashes
- Technical fault
- Time left freezes on 6 or 11
- Time left stops at 10
- Tumble dryer does not start
- Tumble dryer is switched off at end of programme
- Tumble dryer not drying correctly
- Tumble dryer smells of rubber
- Wash2Dry is not working
- Water is leaking
- Water runs out after cleaning heat exchanger
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
