To connect the robot vacuum cleaner to the WiFi network, you need to activate pairing mode manually based on the software version.
Software version 1.05–1.09:
Press the “Base” sensor control and hold it down for more than 2 seconds. The WiFi display flashes for several seconds and then lights up continuously.
Touch the “Start/Pause” sensor control and the “Base” sensor control at the same time and hold them down for more than 2 seconds. The “Base” sensor control flashes. Pairing mode is activated.
Software version higher than 1.10:
Press the “Base” sensor control and hold it down for more than 2 seconds. “WiFi” is shown in the display. Pairing mode is activated automatically.
